What are the five layers of the face?
The five layers of the face are the skin, the subcutaneous fat with its retinacula cutis, the superficial musculo-aponeurotic system (SMAS), the deep fat and loose areolar layer that holds the facial spaces and retaining ligaments, and the periosteum or deep fascia over bone. Mendelson and Jacobson described this concentric arrangement for the midcheek in Clinics in Plastic Surgery (2008), and the same five-layer logic is applied, with regional variations, across the whole face.
Injectors often use a shorter vocabulary — skin, superficial fat, SMAS, deep fat, bone — which is the sequence a needle passes on its way to the periosteum. The two vocabularies describe the same tissue; the table below aligns them and names the product typically placed in each layer.
| Layer | Anatomical description | Injector shorthand | What it holds | Products typically placed here |
|---|---|---|---|---|
| 1 | Skin (epidermis and dermis) | Skin | Dermal vasculature, fine nerve endings | Intradermal techniques; superficial skin-quality products |
| 2 | Subcutaneous fat with retinacula cutis | Superficial fat | Superficial fat compartments, subdermal vessels | Superficial hyaluronic acid filler; some biostimulator dilutions |
| 3 | SMAS and mimetic muscles | SMAS | Facial muscles, platysma continuity, the SMAS fascia | Botulinum toxin into the target muscle; filler is generally kept out of this plane |
| 4 | Deep fat, loose areolar tissue, spaces and retaining ligaments | Deep fat | Deep fat compartments, facial spaces, ligaments, the course of named arteries | Deep hyaluronic acid filler in defined compartments and spaces |
| 5 | Periosteum and deep fascia | Bone | Bone surface, periosteal vessels | Supraperiosteal filler and structural biostimulator placement |
Layers 1 and 2: what sits in the skin and the superficial fat?
Layer 1 is the skin and layer 2 is the subcutaneous fat, bound to the skin by the retinacula cutis — fine fibrous septa that give the superficial fat its compartmented structure. The superficial compartments are what make a filler placed subcutaneously stay where it was put rather than spread diffusely, and they are the reason an injector feels resistance change between one region and the next.
Vessels run in this layer too, close under the skin in the lips and the nasolabial fold, which is why depth control in the superficial plane is not a lesser skill than depth control at bone. On fresh-frozen tissue the compartment boundaries are visible as soon as the skin is reflected; on a slide they are a line.
Layer 3: the SMAS, the layer that moves
Layer 3 is the superficial musculo-aponeurotic system: a continuous sheet that includes the mimetic muscles and the fascia connecting them, in continuity with the platysma below and the galea above. It is the layer of expression, and therefore the layer botulinum toxin is aimed at, muscle by muscle, from the glabellar complex to the platysmal bands.
For filler the SMAS is the reference plane rather than the target: injectors use it as a depth gauge, keeping hyaluronic acid either above it in the superficial compartments or below it in the deep compartments and spaces. The Global Aesthetics Consensus Group's 2016 recommendations on hyaluronic acid complications treat correct plane selection as a primary avoidance strategy, which is a statement about layer 3 as much as about the vessels around it.
Layer 4: where do the deep fat, spaces and ligaments sit?
Layer 4 is the loose areolar layer beneath the SMAS that holds the deep fat compartments, the gliding facial spaces and the retaining ligaments that anchor the superficial layers to the skeleton. Mendelson and Jacobson's midcheek description is built around this layer: the spaces allow movement, the ligaments limit it, and the named arteries travel through or along the boundaries before piercing towards the surface.
This is the layer where plane errors become vascular events. A deep compartment is a safe destination only when the entry point, the angle and the depth keep the needle or cannula away from the arteries that cross the layer; that is why the recognised danger zones are described in terms of layer-4 anatomy. Beleznay and colleagues' review of blindness from fillers in Dermatologic Surgery (2015) is, at its core, a catalogue of what happens when product enters a vessel in or near this layer.
Layer 5: periosteum and deep fascia, the supraperiosteal plane
Layer 5 is the periosteum over bone and, where there is no bone directly beneath, the deep fascia. The supraperiosteal plane is the destination for structural hyaluronic acid filler in the chin, jawline and zygoma and for biostimulators placed in structural areas; its appeal is that the needle tip rests on an unmistakable surface.
Reaching that surface is not the same as staying in that plane. In an observational cadaver study in Aesthetic Surgery Journal, van Loghem and colleagues (2016) compared the placement of soft-tissue fillers by cannula and by sharp needle on cadaveric tissue; the study is one of several that use dyed product and dissection to check where filler actually ends up relative to the plane intended, which is the method a masterclass reproduces at the bench.
Why does the layering change across the face?
The five layers are a principle, not a uniform thickness. In the forehead the SMAS is the frontalis and galea, and the deep plane sits directly on periosteum; in the temple the deep fascia splits into interfascial planes above the temporalis; in the lips the orbicularis oris is layer 3 and the labial arteries run close to it; in the neck the platysma is the SMAS and the deep structures lie under it. A plane name travels across regions; its depth and its neighbours do not.
The course director's own cadaveric studies illustrate the point in the lower face and neck: a reassessment of the mandibular septum and its relationship with the marginal mandibular nerve, and dissections of the cervical nerve for face and neck lifting, both in Aesthetic Surgery Journal. Regional dissection is how the general model becomes a map an injector can use.
How is the five-layer model taught on fresh-frozen tissue?
Layer by layer, in order, with the skin reflected first and the periosteum reached last, and with the question of the moment steering which region is opened next. Fresh-frozen tissue keeps the compliance and colour of the living face, so the compartments, the SMAS and the deep spaces separate on the table rather than fusing into a single fixed block. A one-hour online session with an anatomist can teach the map; a two-day masterclass puts a needle in the participant's hand and then dissects what it placed. ATDERA is the organiser and coordinator of the masterclass; the course director and faculty deliver the teaching in an anatomy laboratory in Ankara; where a credential is involved, the accrediting body is a separate third party — and for this masterclass no accreditation is claimed.
